Contact the vendor for additional information. Other company and product names may be trademarks of their respective owners. Open Menu Close Menu Apple. If the printer has a built-in display Printers with a touchscreen or other built-in display control panel generally expect you to use that display to select or enter the name and password of your Wi-Fi network. Select your base station in AirPort Utility, then enter the base station password, if prompted.

Then click Continue. If you selected "First attempt," push the WPS button on the printer. Quit AirPort Utility.

FAQs & Troubleshooting

Connect the printer to your Mac using the appropriate USB cable. Use the printer setup assistant to connect the printer to your Wi-Fi network. Disconnect the USB cable from the printer and Mac. The printer should remain connected to the Wi-Fi network.

Brother MFC - Enable Wireless Network

If the printer can create an ad-hoc Wi-Fi network You may be able to use the printer's own ad-hoc Wi-Fi network to set up Wi-Fi printing: Install the Mac software that came with the printer, and make sure that it includes a printer setup assistant. Make sure that the printer's ad-hoc Wi-Fi network is turned on. That also explains why the printer immediately started to work again when we returned our Airport Extreme router to the network.

Although now a discontinued model, we have owned this printer for several years and it has been a workhorse, pumping out thousands of pages without so much as a paper jam. You can certainly find these instructions on the Brother web site but we found that they bounce you around to multiple pages and it gets hard to follow. So we decided to pull everything together in this one set of instructions, in the order you need them, to save you some of the pain we experienced.

Add your answer

As you will see below, in order to complete this process, you will need to connect the printer to your router via an Ethernet cable. In our case, the printer and router were in completely different areas which required us to physically bring the printer to the router. If your printer was previously installed, we recommend uninstalling the printer from your Mac by doing the following.

  • make default mail account mac.
  • SOLVED: Printer won't stay connected to network, drops constantly! - Brother MFCL - iFixit.
  • portal 2 computer download mac?

All network settings, such as password and IP address, will be restored to the factory default settings. Since this process requires the printer be connected to the router via an Ethernet cable, it may be a little inconvenient but there really is no other way to do this. We also think that this entire process is a small price to pay when you consider the reliability and value we have gotten from this printer.

Keep in mind that we created this problem because we kept swapping out the router in our network. Had we not been using an Apple router in the beginning, or if we had changed the IP range of the router to the more common We have been using this printer for years with no issues. That said, having these instructions available will save you a lot of time and frustration in managing this, or similar style Brother printers. What wireless printers do you use and how easy is the wireless set-up process for it? Why not join the conversation by adding your comments below. If you liked this article, please consider sharing it with your friends and leaving a comment below.

Thanks for the helpful step-by-step instructions — they worked.

Wireless setup - Macintosh

Now that the printer works wirelessly can I change this setting back to Bridge mode? If your Airport Router is in Bridge mode I assume you have another router that is acting as the DHCP server since a router in Bridge mode generally means it is not providing IP addresses to your network devices. If that is the case, and your main router the one providing the IP addresses uses the same IP range i. Otherwise, you may have to go through this process again and use the main router to get the IP address.

Nice job laying out easy, step by step instructions. Worked out great connecting to my home network- eliminating need for using USB connection every time. Thanks for letting us know this was helpful.

Offers of Special Interest

We appreciate hearing from our readers that they find our site helpful. Thanks for the clear instructions I was able to get it working in 10 minutes!!!!!! I know that the printer connection was valid, because I finally have gotten some pages printed. But 9 out of 10 times, I still see that the printer is offline, or it cannot be found. Step 20 says: Wait about a minute and then print the Network Configuration report to verify that your Brother machine has acquired a valid IP address from your router.

I cannot find on my configuration report any IP address for my wireless network. It is As I noted, there definitely has been some connection made, but it is spotty. To clarify, my print dialog box goes from. I noticed that same issue. After setting up wireless, I found that I had 2 Brother printer options to select from- and the prior USB option was still the default and had offline status.